Scorpio cosworth parts if needed

whiteestate · March 14, 2013, 23:37:52

Im going to collect a bob engine the end of the month does anyone need any bits and pieces off the car as i think they maybe going quite cheaply ? Let us know what you need and i will see what i can sort out.
Obviously all engine parts will be for me but there is an auto box going and the car has only covered 70k.

Lemon-Ade · March 15, 2013, 21:55:34

I'm after the washer plates that go under the driveshaft bolts two holes per plate , like these but the 108mm ones

All twelve if you could please Liam. If the stub shaft is the same as a 2wd cos? Yorevol was after those too.

mk2 cossie · March 16, 2013, 02:50:04

If its got a good condition auto dimming rear view mirror, i'd like that please

Dave2302 · March 16, 2013, 10:45:57

Hi,

If you're not going to use it I could use a PATS module, PATS LED and a short length of it's wire, Diagnostic OBD Socket with a foot or 2 of wiring, and EECV Plug with a foot or 2 of wiring, plus the key and key reader ring and the wiring wth plugs for that

I am going to make a "Bench" rig in a box, to re flash and test the ECU's

Cheers Dave

whiteestate · March 16, 2013, 13:50:55

Ok I'm going on good friday so hopefully will be able to get all these bits with a bit of luck

Matt · March 16, 2013, 15:13:42

is the car a face lift version?

could you take a pic once collected?

whiteestate · March 16, 2013, 17:21:19

Hi Matt im not collecting the complete car just the engine and whatever bits anyone needs really i will contact the chap I'm buying the stuff off and find out what year the car is and will post a bit later.

Lemon-Ade · March 16, 2013, 23:06:49

Quote from: whiteestate on March 16, 2013, 13:50:55
Ok I'm going on good friday so hopefully will be able to get all these bits with a bit of luck

That's great if you can

Dave2302 · March 18, 2013, 10:06:01

Terrific

whiteestate · March 18, 2013, 18:13:31

Haven't been able to get hold of the guy yesterday just tried again now so with a bit of luck he will get back to me with some answers !

whiteestate · March 18, 2013, 18:35:55

Good news is he's got 2 ultima's 1 in pieces and he does not know the age of the cars ?

Ade wants the drive shaft washers
MK2 cossie auto dimming mirror
Dave2302 pats stuff and chipped key
Yorevol wants the stub shafts ,
Will the stub shafts just pop out of the diff like normal splined units ?

Lemon-Ade · April 01, 2013, 16:44:11

Any joy Liam ?

whiteestate · April 01, 2013, 17:24:58

Not been able to get up there my driver let me down so I'm going to have to borrow a van from work but not going to be for a little while now as I'm having an op on monday so i will be out of action for a short while

TimoXr4i · April 01, 2013, 19:59:52

You need a fat torx bit to remove the stub axles, they are bolted with 6 torx bolts on both sides, and with a bit force you can pull the axles out!

doga-ot · April 02, 2013, 00:00:54

If there's another set of 108mm drive shaft washers like Ade wants i'll have them please bud

Cheers Wes

yorevol · April 02, 2013, 23:15:45

forgot about this, ive got some stubs now. rear vented calipers are now needed complete with carriers.

TimoXr4i · April 03, 2013, 13:15:11

Nice, what brakes did you use? I want mine vented too, so i need a pair of discs and callipers, disc brake lsd axle ihave laying around

whiteestate · May 01, 2013, 20:37:26

Last i knew the guy has scrapped both the cars and has no parts left,sounds very dodgy to me !

He was also supposed to be dropping the bob engine off to me this week but i have not been able to contact him but its not so bad as i do not have any space to put the engine any way sorry guys if i had your hopes up