We also host the AskNik site,just click on the Sierra

This website will continue to exist, but feel free to click on the Donate button to help with the funding 😇

The sales section is now only accessible for members who have a subscription.
You can subscribe in your account settings.

Please if you find this site helpful & wish to help with it's funding. Thank You.


Question for MOB

Started by samol, September 19, 2007, 23:36:01

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

samol

Hi Tony, some time ago I was looking at your web page, and you had details of a DIY air fuel ratio light indicator type thing. Just been back to get the full SP and blow me its gone. Do you happen to remember who/where/what the company was. Cheers Ray

TwinTurbo

Still there under all wired up..



while i was surfing one night i found a company called JAYCAR, they are in australia and they sell electronic components. one of wich you might like to fit! why i mention this now is its easey to add in at this point. basicly the kit is for an air/fuel mix meter,in the tuning shops these cost around £100 up each but i built two kits for less than half that, and believe me they are easey to build, and work very well. now i can see at a glimpse if i am running lean, rich or just right!!


TT

victim

#2
I have one of these kits that i've not used and wont be using now, interested?  Say tenner posted ?

samol

Quote from: victim
I have one of these kits that i've not used and wont be using now, interested?  Say tenner posted ?
Hi mate, sounds like a fair deal to me. Contact me by PM, with your details. Cheers Ray

SIDIBEAR

I started to do one of these about two months ago, still not got round to finishing it  

Total cost so far is about £16 for the bits from Maplins, I am using a led bar graphic instead of individual led's. I will post a "How To" once I get it finished.

samol

Quote from: SIDIBEAR
I started to do one of these about two months ago, still not got round to finishing it  

Total cost so far is about £16 for the bits from Maplins, I am using a led bar graphic instead of individual led's. I will post a "How To" once I get it finished.

Hi Mate, sounds interesting, look foreword to you DIY instructions. Cheers Ray

SMF spam blocked by CleanTalk